NComputing M300 User Manual

NComputing M300 User Manual rev.02.21.12
Page 51 of 78
Display Desktop
Wallpapers
Enabling this feature will allow device users to select and display custom Desktop
Backgrounds within their Windows sessions.
Display Last User
Name
Enabling this feature will auto-populate the user name of the last user to log in
when a new user attempts to log in to Windows.
Ask User’s
Permission to
View Session
Enabling this feature will prompt the target user session for permission if someone
attempts to view their session through the NC Console.
2.4 System Settings – L-Series/M-Series
The “L-Series/M-Series” tab provides access to settings that control video streaming, USB support, and
remote console support among other features.
The “L-series/M-series” tab provides the following options and information:
Video Streaming
Support
Enables or disables vSpace’s proprietary video compression and streaming
technology.
JPG Compression
Ratio
Increases or decreases the JPG compression ratio used by vSpace. Higher
compression means more CPU load, but lower network bandwidth use. Lower
compression means lower CPU load, while increasing the amount of data streamed
across the network.
USB Support for L-
Series/M-series
Devices
Enables or disables USB support for L-series and M-series devices.

NComputing M300 Specifications

General

Audio connections	Yes
Headphone outputs	1
Number of computers controlled	-
Certification	FCC, CE
Product color	Black, Grey
Rack mounting	No
Cabling technology	10/100Base-T(X)
Networking standards	IEEE 802.3
AC input frequency	50 - 60 Hz
Power consumption (typical)	6 W
Sustainability certificates	RoHS
Maximum resolution	1440 x 900 pixels