NComputing M300 User Manual

NComputing M300 User Manual rev.02.21.12
Page 75 of 78
7.2 Remote Console Features
While many of the host management features can be accessed remotely, there are some differences
between what can be accessed remotely (from a different vSpace host on the same or different subnet)
and what can be accessed locally (from the Management Console running on the host to which devices
are connected). Below is a feature matrix demonstrating some of these differences.
Available Locally
Available Remotely
(same subnet)
Available Remotely
(cross subnet)
System Settings
View


Edit


USB Assignment
View


Edit

Connected Sessions
View


Edit

Device Settings
View


Edit


While keeping the limitations listed above in mind, features available through the remote console
function in much the same way they would locally. Below is a brief overview of each subsection
available for each remote server.
Server and
Licensing
Information
Click on the server name within the left navigation tree to display a mix of vSpace
and Licensing information for that server (as described in sections 2.1 and 2.2 of
this guide).
System Settings
Provides a selection of host configuration options (as described in section 2.3 of
this guide).
USB Assignment
Provides details on USB devices connected to the host and their current device
access settings (as described in section 4.0 of this guide).
Sessions
Displays a list of currently active sessions on the selected host. Unlike the local
Sessions list, you cannot directly interact with sessions viewed through the
“Remote Servers” section of the vSpace console.

NComputing M300 Specifications

General

Audio connections	Yes
Headphone outputs	1
Number of computers controlled	-
Certification	FCC, CE
Product color	Black, Grey
Rack mounting	No
Cabling technology	10/100Base-T(X)
Networking standards	IEEE 802.3
AC input frequency	50 - 60 Hz
Power consumption (typical)	6 W
Sustainability certificates	RoHS
Maximum resolution	1440 x 900 pixels