NComputing M300 User Manual

NComputing M300 User Manual rev.02.21.12
Page 35 of 78
Device Setup - The “Password” Tab
The Password tab allows the user to enable or disable the device’s firmware password. If set, the device
will prompt for the password anytime a user attempts to access the Device Setup screen or tries to
cancel an automatic connection. It is recommended that this password be set before deployment, to
prevent tampering by unauthorized users.

NComputing M300 Specifications

General

Audio connections	Yes
Headphone outputs	1
Number of computers controlled	-
Certification	FCC, CE
Product color	Black, Grey
Rack mounting	No
Cabling technology	10/100Base-T(X)
Networking standards	IEEE 802.3
AC input frequency	50 - 60 Hz
Power consumption (typical)	6 W
Sustainability certificates	RoHS
Maximum resolution	1440 x 900 pixels