NComputing M300 User Manual

NComputing M300 User Manual rev.02.21.12
Page 72 of 78
6.13 Editing Profiles
Once a profile is created, administrators can edit the profile in the same way they would apply changes
to the settings of an individual device. To do this, select “Profiles” from the left navigation tree within
the Management Console, and then right-click on a profile, as shown below:
Once you have selected a profile to edit, you will be presented with a multi-tabbed configuration menu
that closely resembles the device configuration menu. This menu allows you to rename the selected
profile, as well as alter Connection, Server Group, Login, Password and Firmware Update settings, as
shown below:

NComputing M300 Specifications

General

Audio connections	Yes
Headphone outputs	1
Number of computers controlled	-
Certification	FCC, CE
Product color	Black, Grey
Rack mounting	No
Cabling technology	10/100Base-T(X)
Networking standards	IEEE 802.3
AC input frequency	50 - 60 Hz
Power consumption (typical)	6 W
Sustainability certificates	RoHS
Maximum resolution	1440 x 900 pixels