NComputing M300 - Device Setup - the Login Settings Tab

NComputing M300 User Manual rev.02.21.12
Page 33 of 78
Device Setup - The “Login Settings” Tab
The Login Settings tab contains various device settings related to performance within Windows,
including:
• Video Settings
(each of the 3 M300 client devices within a given kit must run the same resolution and same color depth)
o Resolution
o Color Depth
• Sleep if Idle
(this setting operates within the device firmware to help prevent screen burn-in; within
Windows, the standard Windows screen saver must be used).
• Automatic Login Settings
(Separate login settings are included for each of the three devices)
o Domain
o User
o Program (used for Kiosk mode)
o
Folder (used for Kiosk mode)
Kiosk Mode
To launch an application instead of going to the desktop (also known as kiosk mode), enter the
executable name in the “Program” field, and its drive/folder directory in the “Folder” field. For example,
launching Internet Explorer on login would require “iexplore.exe” in the Program field and “C:\Program
Files\Internet Explorer” in the Folder field.