NComputing M300 User Manual rev.02.21.12
Page 54 of 78
Enables or disables the shadow seen beneath the mouse cursor. (Mouse shadows
are not supported)
Allow blinking
cursor
Enables or disables the blinking cursor effect.
Font smoothing
Enables or disables smoothing which can improve the appearance of fonts in some
situations at the cost of increased resource usage.
Maximum video
frame rate (fps)
Restricts streaming video frame rate to the value entered. Lower values will reduce
network traffic when streaming videos to client sessions.
Video Quality
This setting affects the JPEG compression value found in the L-Series/M-Series tab
(section 2.4). Lower percentage values will reduce the amount of network traffic
being sent to client sessions at the cost of video quality.
Video streaming
support
This setting enables or disables the advanced video streaming capabilities available
to L300 and M300 devices.
Advanced
Graphics
Compression
(MOJO)
Allows users to have more than one window open and streaming video at a time
per session. Note that video performance may be better when limited to a single
stream at a time.
frames to skip
between updates
This value affects the rate at which the session image is updated. Larger values
reduce network traffic but create a larger delay between updates.
Audio sample rate Sets the audio sample rate to be used by sessions.
Audio mono
sound
Sets the session to use mono sound.
Audio 8bit sound Sets the session to use 8-bit sound.
bytes) of each
network video
update
Restricts the size of network video updates. Best left at “0” (default value).
Packet queue size
for high latency
networks
Increasing this setting can provide a smoother streaming experience in high-
latency networks.
To Next Page
Loading...
Need help?
General
