NCR SelfServ 34 ATM Installation Guide
B006-6590-C000 49
● Wooden and foam blocks from beneath the module.
● Tape from the cassette latches and across the cassette and purge bin handles.
● Remove the configuration kit from inside each cassette if supplied.
Cash Acceptor and Recycler
1. Remove the packaging from the following areas:
● Plastic latch de-activator from the module latch.
● Foam packaging from the front of the module.
● Foam block from between the cash acceptor and recycler and the security
enclosure wall.
Note: If a media dispenser is fitted, remove the foam block from between the cash
acceptor and recycler and the dispenser.
To Next Page
Loading...
