NCR SelfServ 34 ATM Installation Guide
56 B006-6590-C000
6. Remove the tape and foam piece from behind the escrow unit.
7. Remove the tape from around the escrow latch.
Envelope Depository and Dispenser
Remove the packaging from the following areas:
● Plastic latch de-activator from the depository latch.
● Foam packaging from the front of the module.
● Foam block from between the module and the security enclosure wall.
Note: If a media dispenser is fitted, remove the foam block from between the media
dispenser and the envelope depository and dispenser.
● Cable tie from the access door on the envelope dispenser bin.
To Next Page
Loading...
