Need help?Do you have a question about the NCR SelfServ 34 and is the answer not in the manual?
General| Brand | NCR |
|---|---|
| Model | SelfServ 34 |
| Category | Cash Counter |
| Language | English |
Explains the structure and purpose of the installation documentation bookset.
Defines the intended readers and the manual's overall objective.
Details requirements for preparing the installation location before ATM setup.
Outlines the process for configuring the ATM's hardware and software.
Describes how to set up the ATM's communication hardware and software.
Guides users through the initial startup and configuration steps for the ATM.
Lists all necessary tools and equipment for performing the ATM installation.
Provides instructions and safety precautions for physically moving the ATM unit.
Step-by-step guide to safely unpack the ATM from its shipping container.
Procedures for checking the ATM for any damage incurred during transit.
Instructions on completing the report form for the ATM installation process.
Detailed steps for safely lifting and removing the ATM from its shipping pallet.
Overview of different types or classifications of ATM installations.
Guidance on how to correctly place the ATM at its designated installation site.
Instructions for attaching the standard or ADA compliant collar to the ATM.
Steps for installing the optional advert collar onto the ATM unit.
Procedure for attaching the logo collar, typically for walk-up installations.
Guide on how to install the open advert collar variant of the ATM.
Instructions for securely fastening the ATM to the floor or a mounting plinth.
Overview of how to connect all necessary power and data cables to the ATM.
Steps to gain access to the ATM's cable entry point for connections.
Detailed instructions for connecting the ATM's main power supply cable.
Procedures for connecting communication, data, and peripheral cables.
Final steps to secure and close the ATM's cable entry point.
Identifies the physical locations of various internal modules within the ATM.
Instructions for removing packaging from the ATM's top-box compartment.
Guide to removing packaging materials from the ATM's PC module.
Steps for removing packaging from modules located on the ATM's module tray.
Procedures for removing internal packaging from the coin dispenser module.
Instructions for removing packaging from the iTRAN 1000 Check Processor module.
Steps to remove internal packaging from the iTRAN Scalable Check Processor.
How to remove tape and bubble wrap from the security enclosure.
Procedures for removing internal packaging from the media dispenser module.
Steps to remove internal packaging from the cash acceptor and recycler.
Instructions for removing packaging from the UD686 cash acceptor module.
Procedures for removing internal packaging from the UD700 cash acceptor module.
Steps to remove internal packaging from the envelope depository and dispenser.
General guidance for removing packaging from remaining modules and areas.
Instructions for applying a decal behind the card reader orientation window.
Guidance on fitting decals to the advert light panel or window.
Information on applying decals to the ATM's entry and exit slots.
To Next Page
