NCR SelfServ 34 ATM Installation Guide
B006-6590-C000 29
9. Perform the following steps to fit the advert window bezel:
a Locate the tabs on the window bezel into the slots in the top of the collar
assembly. Push the bezel back into position, securing in place using three M4 x 12
tamper-proof screws.
b Locate the three tabs on the plastic blanking cover into the holes in the advert
window bezel then clip in place, covering the tamper-proof screws.
Note: A security screwdriver bit (supplied in the collar box) is required to install the
tamper-proof screws.
To Next Page
Loading...
