NCR SelfServ 34 ATM Installation Guide
52 B006-6590-C000
6. Pull each cassette out of the lower module, then remove the foam block and
accessories package from inside each cassette.
Cash Acceptor (UD686)
1. Remove the packaging from the following areas:
● Plastic latch de-activator from the module latch.
● Foam packaging from the front of the module.
● Foam block from between the cash acceptor and the security enclosure wall.
Note: If a media dispenser is fitted, remove the foam block from between the cash
acceptor and the dispenser.
● Wooden and foam blocks from beneath the module.
To Next Page
Loading...
