System Settings
118 EasyOne Pro™ / EasyOne Pro™ LAB
FVC/FVL Tab
Note
Additional information for FVC-FEV6 selection: FEV6
indicates the exhaled volume after 6 seconds. When set to
FEV6, the program stops the measurement after 6 seconds.
Several parameters such as FEF25, FEF50, FEF75 and FEF25-
75 are not reported in that setting.
Note
The settings selected here affect the predicted normals, the
interpretation and the displayed parameter readings.
With Parameter Select c you open a window for selection of the parameters
to be calculated. Different parameters can be selected for the display and
for the printout.
Choose a parameter in the "Available" list a.
Click b to transfer it to the "Selected" list.
Follow these steps to remove a parameter from the list
select it in the "Selected" list c
click d to remove it from the list.
Click e to scroll the list up and down.
Fig. 8-9 FVC / FVL tab
a Select FVC/FEC6
b Select the test type
c Click to select a parameter
d Predicted values are represented by
points or as a range
e Select one of the options if you wish to
print the lung age
To Next Page
Loading...
