Performing a Test
66 EasyOne Pro™ / EasyOne Pro™ LAB
3.7 Quick Test
You have the option to perform a quick test without entering patient data.
When Quick Test is selected, no predicted values are available, because
they are calculated on the basis of the patient data.
In the main menu, select Perform Test.
A menu will appear.
Click Quick Test and perform the test as usual.
Note
It is not possible to edit the predicted values retrospectively
once measurements have been taken.
The Quick Test feature is not available for DLCO tests.
Fig. 3-30 Menu
To Next Page
Loading...
