EasyManua.ls Logo

NDD EasyOne Air User Manual

NDD EasyOne Air
144 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
Page #1 background imageLoading...
Page #1 background image
new diagnostic design
9000007_01
© ndd Medizintechnik AG • Technoparkstrasse 1, 8005 Zurich, Switzerland • www.ndd.ch
EasyOne Air
Operator’s Manual V1.1

Table of Contents

Question and Answer IconNeed help?

Do you have a question about the NDD EasyOne Air and is the answer not in the manual?

NDD EasyOne Air Specifications

General IconGeneral
CategoryMedical Equipment
Device TypeSpirometer
ModelEasyOne Air
ManufacturerNDD Medical Technologies
ConnectivityBluetooth, USB
DisplayColor touchscreen
Flow Range0 to 16 L/s
Measurement MethodUltrasound
Measurement ParametersFVC, FEV1, FEV1/FVC, PEF
TechnologyTrueFlow ultrasound technology
ComplianceATS/ERS
Operating Temperature10 to 40 °C
PowerRechargeable battery
SensorsUltrasonic sensors

Summary

1 Preface

1.2 Identification and revision of the EasyOne Air spirometer

Explains how to identify the manual revision for the spirometer.

1.4 Intended use of the EasyOne Air spirometer

Describes the purpose and target users for the spirometer.

1.10 Contact information

Provides contact details for the manufacturer.

4 Introduction

4.1 Introduction to the EasyOne Air spirometer

Provides an overview of the EasyOne Air spirometer.

4.2 Introduction to the EasyOne Connect software

Introduces the EasyOne Connect software and its features.

5 Cybersecurity

5.1 About cybersecurity

Discusses securing EasyOne Connect and EasyOne Air.

5.5 Escalating in case of a security breach

Outlines steps to take in case of a security breach.

5.6 Dealing with a lost or stolen EasyOne Air or PC

Provides instructions for lost or stolen devices.

6 Connectivity and data exchange

6.1 About connectivity between EasyOne products

Explains how EasyOne products connect via PC software.

6.2 About integration of EMR systems

Details EMR system integration and supported standards.

7 Performing spirometry

7.1 Overview of the spirometry workflow

Presents a general workflow diagram for spirometry.

7.2 About preparation of spirometry and instructions for the patient

Covers patient preparation and instructions for spirometry.

7.5 Performing spirometry using EasyOne Air stand-alone

Guides on performing tests using the device independently.

7.6 Performing spirometry using EasyOne Connect in combination with EasyOne Air

Details performing tests using both device and PC software.

9 Hygiene and cleaning

9.1 Avoiding contamination while performing spirometry

Provides guidance on preventing contamination during tests.

9.2 List of cleaning solutions for EasyOne Air

Lists recommended cleaning solutions for the device.

10 Working with patient data and reports

10.1 Working with patient data and reports on EasyOne Air

Covers managing patient data and reports on the device.

10.2 Working with patient data and reports in EasyOne Connect

Covers managing patient data and reports in the PC software.

10.2.5 Copying patient data between EasyOne Air and EasyOne Connect

Details transferring data between device and PC software.

11 Configuration

11.1 Configuration of EasyOne Air

Covers device and spirometry settings for EasyOne Air.

11.2 Configuration of EasyOne Connect

Details general, test, and report configurations for PC software.

11.1.2 Performing a firmware update with EasyOne Air

Guides on updating the device firmware using an SD card.

12 Calibration check

12.1 About calibration check with EasyOne Air

Introduces different types of calibration checks for the device.

12.2 Performing a calibration check with EasyOne Air

Guides on performing calibration checks using a syringe.

13 Servicing and troubleshooting

13.2 Checking for correct operation of EasyOne Air

Explains how to check if the device is operating correctly.

13.3 List of troubleshooting solutions

Offers solutions for common operating problems.

14 Specifications and bibliography

14.1 List of specifications for EasyOne Air

Lists technical specifications for the EasyOne Air device.

14.3 List of order numbers and accessories for EasyOne Air

Lists available order numbers and accessories for the device.

A Appendix

A.1 Electromagnetic Compatibility (EMC)

Discusses EMC conformance and safety precautions.

A.1.5 Electromagnetic emission

Provides guidance and declaration on electromagnetic emissions.

A.1.6 Electromagnetic immunity

Gives guidelines for electromagnetic immunity according to IEC standards.

Related product manuals