Configuration
Operator’s Manual V1.1 • EasyOne Air • EasyOne Connect
© ndd Medizintechnik AG • Technoparkstrasse 1, 8005 Zurich, Switzerland • www.ndd.ch 115/144
117
11.2.4.8 Utilities > Configuration > Test > Provocation
Protocol
Different protocols for the provocation test are available using Mannitol and
Methacholine as provocative agents.
Choose the protocol from the drop-down list.
11.2.5 Description of device configurations of EasyOne Connect
Utilities > Configuration > Device
You can use EasyOne Connect in combination with any EasyOne product.
Easy on-PC
This tab displays hardware information about the connected
Easy on-PC sensor.
If the Easy on-PC sensor cannot connect, the serial COM port might be used
by another device. To switch to a free serial COM port, you can manually select
one from the drop-down list or choose the Auto Detect button.
Easy on-PC Operator’s Manual
EasyOne Air
Utilities > Configuration > Device > Selection
From this tab, select the device that you want to use for performing spirometry
with EasyOne Connect.
11.2.6 Description of report configurations of EasyOne Connect
Utilities > Configuration > Report
Layout
CAUTION
MISINTERPRETATION OF RESULTS
Reports that are labeled as Custom Report are not validated.
Use customized reports at your own risk.
The layout editor allows for customization of the reports’ layout.
For details, contact your EasyOne dealer or the ndd Servicing Department.
Contact information, 4
To Next Page
Loading...
Need help?
General
