NDD EasyOne Air User Manual

Configuration
Operator’s Manual V1.1 • EasyOne Air • EasyOne Connect
© ndd Medizintechnik AG • Technoparkstrasse 1, 8005 Zurich, Switzerland • www.ndd.ch 93/144
117
11 Configuration
CAUTION
FALSE DIAGNOSIS
Wrong configuration settings can cause incorrect diagnostic calculations.
Be aware that wrong configuration settings can affect the predicted values,
the system interpretation, and the displayed result values.
Verify the configuration settings.
11.1 Configuration of EasyOne Air
You can configure EasyOne Air in the tools menu.
11.1.1 Configurations in the settings menu of EasyOne Air
>
11.1.1.1 Description of device settings of EasyOne Air
> >
On this screen, you can choose basic settings for EasyOne Air.
Setting Purpose Options Default setting
Speaker volume To set the speaker volume 0% – 100% 50%
Key click To enable sound for audible click
feedback
Selected, deselected Selected
Beep during
maneuver
To enable a beeping signal during
breathing maneuvers as feedback
about air flow
Selected, deselected Selected
User Logon required To enable password protection Selected, deselected Selected
System Time To set the time Numeric entry (Not applicable)
System Date To set the date Numeric entry (Not applicable)
Date format To set the format of the date YYY-MM-DD, MM/DD/
YYYY, DD.MM.YYYY
(Determined by
regional setting at
first-time setup)
Time format To set the format of the time 24h (00:00 – 23:59), 12h
(AM/PM)
(Determined by
regional setting at
first-time setup)
Patient ID format To set the format of the patient ID for
compliance with national standards
Numbers only,
Alphanumeric
(Determined by
regional setting at
first-time setup)
 Description of device settings

NDD EasyOne Air Specifications

General

Brand	NDD
Model	EasyOne Air
Category	Medical Equipment
Language	English