Performing spirometry
Operator’s Manual V1.1 • EasyOne Air • EasyOne Connect
© ndd Medizintechnik AG • Technoparkstrasse 1, 8005 Zurich, Switzerland • www.ndd.ch 63/144
74
4 Choose End.
The home screen is displayed.
List of cleaning solutions for EasyOne Air, 81
About interpreting results, 72
About compatible printers, 19
7.6 Performing spirometry using EasyOne Connect in combination
with EasyOne Air
7.6.1 Connecting EasyOne Air to EasyOne Connect
To use EasyOne Connect in combination with EasyOne Air, you need to
connect EasyOne Air to your PC over Bluetooth.
Prerequisite
On your PC, Bluetooth is enabled.
A USB Bluetooth adapter is supplied with EasyOne Air in case your PC
does not have Bluetooth built-in.
List of box contents, 17
If EasyOne Air is directly connected to a PC over USB, performing tests is not
possible. Leakage currents could harm the patient. Connect EasyOne Air to
your PC wirelessly, only.
1 On EasyOne Air, choose > > .
2 Select the Bluetooth check box and keep the menu open.
EasyOne Air is discoverable over Bluetooth by other devices.
3 On your PC, navigate to the Bluetooth menu to add Bluetooth devices.
Where to find the Bluetooth menu varies between the versions of
Microsoft Windows. For assistance, open the Control Panel in any Windows
version and press the F1 key.
In the list of available devices, you see “EasyOne Air” followed by its
serial number.
4 On your PC, select EasyOne Air for pairing.
5 Exchange the Bluetooth pairing key as advised by your PC and by
EasyOne Air.
Your PC and EasyOne Air are now paired. Whenever Bluetooth is
enabled on both devices and both devices are within range, your PC and
EasyOne Air reconnect automatically.
To Next Page
Loading...
Need help?
General
