Working with patient data and reports
Operator’s Manual V1.1 • EasyOne Air • EasyOne Connect
© ndd Medizintechnik AG • Technoparkstrasse 1, 8005 Zurich, Switzerland • www.ndd.ch 85/144
92
5 Tap and hold on the patient record that you want to export.
A pop-up window is displayed.
6 In the pop-up window, choose Export.
The patient record is saved to the SD card.
7 Remove the SD card.
10.1.5 Viewing and printing reports on EasyOne Air
1 Choose .
The test selection list is displayed.
2 Select a test.
The report screen is displayed.
3 To skip through the trials, choose >> or <<.
4 To enlarge, tap on the combined volume-time curve and flow-volume curve
or on the parameter table.
5 To reduce, tap again on the combined volume-time curve and flow-volume
curve or on the parameter table.
6 If you want to print the report, choose Print.
A progress bar is displayed, which indicates the progress of the print-
out.
7 To view another test, do the following:
a) Choose < Back.
b) From the test selection list, select another test.
The report screen is displayed.
8 Choose the home button.
The home screen is displayed.
10.1.6 About the reports menu and the history menu
To view the reports sorted by date, choose from the home screen.
To view the reports sorted by patient, choose > .
Viewing and printing reports on EasyOne Air, 85
To Next Page
Loading...
Need help?
General
