Connectivity and data exchange
Operator’s Manual V1.1 • EasyOne Air • EasyOne Connect
© ndd Medizintechnik AG • Technoparkstrasse 1, 8005 Zurich, Switzerland • www.ndd.ch 50/144
50
9 If required, print an additional report from the test result screen.
10 Choose Finish.
The test results are sent to your EMR system, and EasyOne Connect is
closed automatically.
Your EMR system receives the test results.
11 In your EMR system, confirm the received test results and proceed as
required.
Performing spirometry, 51
6.2.6.3 Sending individual test results to your EMR system
It is possible to send individual test results to your EMR system even if that
test is not part of an order from the EMR system. This enables you to work
without orders from your EMR system and to only send test results to your EMR
system.
Prerequisite
You have configured any one of the available plug-ins.
1 Choose Patients.
2 Select a patient.
3 Choose History.
4 Choose the button.
Hidden buttons are revealed.
5 Choose Send to EMR.
To Next Page
Loading...
Need help?
General
