Configuration
Operator’s Manual V1.1 • EasyOne Air • EasyOne Connect
© ndd Medizintechnik AG • Technoparkstrasse 1, 8005 Zurich, Switzerland • www.ndd.ch 103/144
117
2 Insert the SD memory card into the SD card slot.
3 Close and lock the battery compartment by turning the lock screw
counterclockwise.
4 Choose > > Backup.
A message is displayed that asks whether you want to encrypt the
backup with a password.
5 Do one of the following:
a) To encrypt the backup with a password, choose Set password and enter
the password in the following window.
b) To proceed without setting a password, choose No password.
The SD memory card is checked for sufficient free space.
The complete database and all configuration settings are backed up to
the SD memory card.
After successful completion of the backup, a message is displayed.
6 Choose the home button.
7 Remove the SD memory card.
11.1.4 About the information menu of EasyOne Air
> .
The information menu displays the firmware version of EasyOne Air.
To Next Page
Loading...
Need help?
General
