NDD EasyOne Air User Manual

Appendix
Operator’s Manual V1.1 • EasyOne Air • EasyOne Connect
© ndd Medizintechnik AG • Technoparkstrasse 1, 8005 Zurich, Switzerland • www.ndd.ch 141/144
144
A.1.4 Wireless module
EasyOne Air contains a wireless module for Bluetooth communication.
See Wireless connection in:
 List of specifications for EasyOne Air, 125
A.1.5 Electromagnetic emission
Guidance and manufacturer’s declaration – electromagnetic
emissions
EasyOne Air is intended for use in the electromagnetic environment specified
below. The user of EasyOne Air should assure that it is used in such an
environment.
Emissions test Compliance Electromagnetic environment – guidance
RF emissions
CISPR 11
Group 1 EasyOne Air uses RF energy for its internal function. Additionally,
the EUT contains a Radio Bluetooth, BLE and WLAN module, which
complies with the national regulations. Therefore, its RF emissions
are very low and are not likely to cause any interference in nearby
electronic equipment. However, a separation distance of 30 cm
shall be maintained.
RF emissions
CISPR 11
Class B EasyOne Air is suitable for use in all establishments, including
domestic establishments and those directly connected to the
public low-voltage power supply network that supplies buildings
used for domestic purposes.
Harmonic emissions
IEC 61000-3-2
Class A
Voltage fluctuations/
flicker emissions
IEC 61000-3-3
Complies
 Emission table for IEC 60601-1-2 3
rd
and 4
th
edition

NDD EasyOne Air Specifications

General

Brand	NDD
Model	EasyOne Air
Category	Medical Equipment
Language	English