NDD easyone pro - Equipment Symbols

Introduction
14 EasyOne Pro™ / EasyOne Pro™ LAB
Equipment Symbols
Observe the information given in the operator manual.
Do not reuse (single patient use).
CE marked per the Medical Device Directive 93/42/EEC of
the European Union.
Product certification for the USA and Canada.
Connection to power line ON (mains power switch).
Connection to power line OFF (mains power switch).
Temperature and humidity sensor.
Potential equalization pin.
Alternating voltage.
Gas inlet for DLCO gas.
Gas inlet for O2 (oxygen).
The number found under this symbol is the date of manufac-
ture in the YYYY-MM format.
Manufacturer
0
12
0