To Next Page

To Previous Page

EasyOne Pro™ / EasyOne Pro™ LAB 35

Start-up and Initial Preparation

2.8 Inserting the One-Way Valve, DLCO barriette™/FRC

barriette™ and spirette™

One-Way Valve, DLCO barriette™

Note

The valve unit is only required for DLCO and FRC tests. All

other tests are performed without the valve unit. The device

is to be operated only with the original ndd DLCO

barriette™.

Warning

Cross Contamination Between Patients—The DLCO

barriette™ is intended for single patient use. Use a new one

for each patient to prevent cross contamination between

patients.

 Attach the one-way valve to the valve unit (aligning the arrows) as shown

in Fig. 2-19 and turn it clockwise as far as possible.

Fig. 2-19 Attaching the one-way valve

Questions and Answers:

Need help?

Do you have a question about the NDD easyone pro and is the answer not in the manual?

NDD easyone pro Specifications

General