Start-up and Initial Preparation
36 EasyOne Pro™ / EasyOne Pro™ LAB
Insert the DLCO barriette™ in the one-way valve (aligning the arrows) as
shown in Fig. 2-20 and check that it sits tight.
FRC barriette™ (EasyOne Pro™ LAB only)
Note
The FRC barriette™ is required only when also FRC tests will
be performed with the EasyOne Pro™ LAB. If the EasyOne
Pro™ LAB is used for DLCO testing, the DLCO barriette™ will
also have to be attached here.
The device is to be operated only with the original ndd FRC
barriette™.
Warning
Cross Contamination Between Patients—The FRC barriette™
is intended for single patient use. Use a new one for each
patient to prevent cross contamination between patients.
Fig. 2-20 Inserting the DLCO barriette™
To Next Page
Loading...
