Appendix
150 EasyOne Pro™ / EasyOne Pro™ LAB
12.6 Report Designer
Starting the Report Designer
On the initial screen, select Utilities.
Select Configuration.
In the Configuration menu, select the Report tab.
On the Report tab, select the Layout Editor.
Adding a Logo to an Existing Test
On the Report Designer tab, select New Report (Fig. 12-3: left).
Select the test to which you want to add the logo (Fig. 12-3: right).
Fig. 12-2: Report tab
Fig. 12-3: New Report button (left), test selection (right)
To Next Page
Loading...
