Section 3: Features
Product Description 137
3
Secure Set Relocation Conditions
● Any user-deÞned programming stored in the SRAM will not be swapped (for example, Call
Forward set up, Selectable Display Messaging, etc.).
● The extensions to be swapped must be idle while the swap is performed, or an "Invalid" error
message will be received.
● Data for virtual extension's cannot be swapped.
● When a swap is performed, the following actions are executed for the swapped extensions.
- Camp On Clear (Program 11-12-05)
- Common Cancel (Program 11-12-37)
- Last Number Redial Clear (Program 11-12-17)
- Saved Number Clear (Program 11-12-18)
- Incoming History data is deleted.
20-06 Class of Service for Extension
21-02 Trunk Group Routing for Extensions
21-04 Toll Restriction Class for Extensions
21-07 Toll Restriction Override Password Setup
21-10 Dial Block Restriction Class Per Extensions
21-11 Hotline Assignment
21-13 ISDN Calling Party Number Setup for Extensions
21-15 Individual Trunk Group Routing for Extensions
21-18 IP Trunk Calling Party Number Setup for Extensions
21-19 IP Trunk (SIP) Calling Party Number Setup for Extensions
21-20 SIP Trunk Call Discernment Setup for Extensions
22-04 Incoming Extension Ring Group Assignment
22-06 Normal Incoming Ring Mode
23-02 Call Pickup Group
23-03 Ringing Line Preference
23-04 Ringing Line Preference for Virtual Extensions
24-03 Park Group Assignment
24-06 Fixed Call Forwarding
24-07 Fixed Call Forwarding Off-Premise
26-04 ARS Class of Service
26-07 Not used in U.S.
31-02 Internal Paging Group Assignment
41-02 ACD Group and Agent Assignments
41-17 ACD Login Mode Setup
42-02 Hotel/Motel Telephone Setup
92-05 Password for Extension Data Swap
To Next Page
Loading...
Need help?
General
