Service Processor 3-53
HE (Help)
NML MNT m b u
X X X X X
This command displays the list of commands.
The list of commands differs for Normal Mode and Maintenance Mode.
Note: This command can also be executed by entering HELP.
Table 3-40. HE Display Screen
Screen Image Reference
iSPyz:---> heENTER>
iSP commands :
System Control (both customers and maintenance persons)
DF – Shut down the system (override)
DN – Shut down the system
DP – Generate the system dump interrupt
PC – Power cycle
RS – Cold reset the system
UP – Bring up the System
Configuration (both customers and maintenance persons)
HC – Hardware configuration and partitioning
Miscellaneous (both customers and maintenance persons)
CM – Change SP command mode
DL – Display SP logs
DT – SP Date and Time
EN – Display environmental information
FV – Display firmware versions
HE – Display this help
ML – Display message log
A
HE command terminated.
A: Displays help for Normal Mode commands.
To Next Page
Loading...
