3-20 Service Processor
DL (Display SP Logs)
NML MNT m b u
X X X X X
This command displays the logs stored in the iSP. You can upload the logs as a file to
an FTP server.
The logs are managed in two iSPs independently if the iSP is redundant. The logs are
stored in the storage of the iSP operating as the master when the logs occurred and
won’t be transferred to the new master iSP if the master is changed.
Table 3-23. DL Screen
Screen Image Reference
iSPyz:---> dl<ENTER>
Log area status (03/01/2002 18:59:00 iSPFW R01.01):
Type Entries Latest No. Earliest Latest
--------------------- --------- -------------- ------------------------------- ----------------------------------
activity 1000 404 01/31/2002 12:24:50 02/29/2004 13:54:12
HW fatal 16 0 01/31/2002 12:24:50 02/29/2004 13:54:12
HW recoverable 64 32 01/31/2002 12:24:50 02/29/2004 13:54:12
processor MCA 128 20 01/31/2002 12:24:50 02/29/2004 13:54:12
processor CMC 64 2 01/31/2002 12:24:40 02/29/2004 13:54:12
processor INIT 64 1 01/31/2002 12:24:40 01/31/2002 13:54:12
system dump 8 7 01/31/2002 12:24:40 02/29/2004 13:54:12
iSP snapshot 8 3 02/29/2004 15:34:51 02/29/2004 13:54:12
A
Display or FTP upload the activity logs? (d[isplay]/f[tp]/CR=exit) : f<ENTER>
B
IP of FTP server [default=10.0.0.2] (CR=skip) : 10.0.0.3<ENTER>
account [default=necuser] : necuser<ENTER>
password [default=********] : xxxxxxxx<ENTER>
file path : log/activity.log<ENTER>
connecting...
connected.
uploaded.
C
Display or FTP upload? (d[isplay]/f[tp]/CR=back) : d<ENTER>
D
Filter logs by partition? (a[ll]/0-3/CR=back) : a<ENTER>
E
To Next Page
Loading...
