System Operation 2-21
Storage Environment:
! Temperature: 41 to 113°F (5 to 45°C)
! Humidity: 20 to 80%, no condensation
! Maximum wet bulb humidity: 78.8°F (26°C)
DAT Cartridge Labels
Use the following labeling information:
! Place labels securely on the DAT cartridge in the position shown in
Figure 2-15. Be sure to write the start date of DAT cartridge use on the
attached Index label.
! If you need to change the contents for the DAT, replace the label with a
new one. (Do not erase the label contents.) Be sure to remove the old
label before attaching the new label.
! If you use a label other than the specified INDEX label, be sure the label
size is correct, the label can be easily replaced, and the label doesn’t leave
adhesive after removal.
Figure 2-15. Digital Audio Tape Label Positions
NEC
To Next Page
Loading...
