NEC Express5800 1160Xd - Virtual SOP

3-10 Service Processor
Virtual SOP
When you select Virtual SOP (Virtual System Operator Panel) on the iSP Main Menu,
Virtual SOP appears. The Virtual SOP periodically refreshes the display of the state of
all the partitions.
To return to the Main Menu from the Virtual SOP, press ^B (CTRL+B).
Virtual SOP is available only on the master iSP.
Table 3-9. Virtual SOP Screen
Screen Image Reference
iSP MAIN MENU
0) OS(BIOS) serial console of partition#0 (INITIALIZING )
1) OS(BIOS) serial console of partition#1 (RUNNING )
2) OS(BIOS) serial console of partition#2 (STOPPED )
3) OS(BIOS) serial console of partition#3 (FAULT )
4) OS(BIOS) serial console of partition#4 (POWER OFF )
5) OS(BIOS) serial console of partition#5 (RUNNING )
6) OS(BIOS) serial console of partition#6 (NOT CONFIGURED )
7) OS(BIOS) serial console of partition#7 (NOT CONFIGURED )
V) Virtual System Operator Panel
S) iSP commands
E) Exit
DISCONNECTALL) disconnect all console connections
iSPyz> V<ENTER>
----- Virtual System Operator Panel --------------------- 01/31/2001,19:30:20 -----
xx 0 HW INITIALIZING yyyyyy xx 1 RUNNING yyyyyy
BIOS messages BIOS messages
SP messages SP messages
xx 2 STOPPED yyyyyy xx 3 FAULT yyyyyy
BIOS messages BIOS messages
SP messages SP messages
xx 4 POWER OFF yyyyyy xx 5 RUNNING yyyyyy
BIOS messages BIOS messages
SP messages SP messages
xx 6 NOT CONFIGURED yyyyyy xx 7 NOT CONFIGURED yyyyyy
BIOS messages BIOS messages
SP messages SP messages
----- Enter CTRL+B to quit ------------------------------------------------------------------
:
:
:
:
:
<CTRL>+<B>
A
B
C
D