BIOS Setup 4-17
Advanced Submenu
When you select “Advanced” on the Advanced menu, the following screen appears. For
more information on the option functions, refer to “Table 4-5 Advanced Submenu
Options.”
POST Error Pause
Item Specific Help
Select the operating
system installed
on your system which
you will use most
commonly.
Note: An incorrect
setting can cause
some operating
systems to display
unexpected behavior.
F1 Help ^ v Select Item - / + Change Values F9 Setup Defaults
Esc Exit < > Select Menu Enter Select Sub-Menu F10 Save and Exit
PhoenixBIOS Setup Utility
Advanced
[Enabled]
Advanced
Figure 4-4. Advanced Submenu
Table 4-5. Advanced Submenu Options
Menu Option Description
POST Error Pause Disabled
[Enabled]
If a non-fatal error occurs during POST (POST will
continue), specifies whether the boot process will
pause once POST is completed.
[ ]: Default setting
Handling the undetected VGA:
If VGA cannot be detected and serial console redirection is enabled, messages will be displayed
on the serial console instead of the display connected with the VGA, and the boot process will
continue. If the serial console redirection function is disabled, the following takes place and the
boot process continues:
! Error code is displayed on the LCD (Code:9009).
! A BIOS event log of the error code above is collected.
“9009 Console Device was not found.”
To Next Page
Loading...
