NEC Express5800 1160Xd - RS (Cold Reset System)

3-56 Service Processor
RS (Cold Reset System)
NML MNT m b u
X X X
This command performs a cold reset of the system.
Note: This command performs a reset without any notification
even if the OS (BIOS) is running.
Table 3-45. RS Display Screen
Screen Image Reference
iSPyz:---> rsENTER>
CAUTION:
System will be reset without any notice to the softwares even if they are running.
Enter partition number (0-3/all/CR=exit) : all<ENTER>
A
Execute OK? (y/[n]) y<ENTER>
B
RS command was accepted. All partitions will be resetted soon.
C
[iSPyz:INFO.ccc] partition 0 : initializing HW.
[iSPyz:INFO.ccc] partition 1 : initializing HW.
:
:
:
[iSPyz:INFO.ccc] partition 0 : handed off the control to BIOS.
[iSPyz:INFO.ccc] partition 1 : handed off the control to BIOS.
D
Table 3-46. RS Display Screen References
Reference Description
A Enter a partition number
If you select “all”, all the configured partitions become the targets.
However, the partitions that are already OFF do not become the targets
B Displays the confirmation message.
To execute, enter “y.”
C Displays the RS command acceptance message.
The actual process runs in the background.
D Displays the state of the process running tin the background.