NEC Express5800 1160Xd - FV (Firmware Versions)

3-32 Service Processor
FV (Firmware Versions)
NML MNT m b u
X X X X X
This command displays the version information of the iSPFW and BIOS. The command
performs a checksum of the storage area. It is managed independently in each iSP if the
iSP is redundant.
Table 3-32. FV Screen
Screen Image Reference
iSPyz:---> fv<ENTER>
Firmware Versions : (currently running firmware is iSP FW bank1)
iSP BOOT (*) : xx.xx generated on mm/dd/yyyy hh:mm:ss
iSP FW bank0 : xx.xx generated on mm/dd/yyyy hh:mm:ss
iSP FW bank1 (*) : xx.xx generated on mm/dd/yyyy hh:mm:ss
BIOS bank0 (01 45 ) : xx.xx generated on mm/dd/yyyy hh:mm:ss
PAL_Axx.xx PAL_Bxx.xx SALxx.xx
BIOS bank1 ( 23 67) : xx.xx generated on mm/dd/yyyy hh:mm:ss
PAL_Axx.xx PAL_Bxx.xx SALxx.xx
A
Do you want to check the flash memory? (y/[n]) : y<ENTER>
B
checking iSP BOOT bank...
passed.
checking iSP FW bank0...
passed.
checking iSP FW bank1...
passed.
checking BIOS bank0...
passed.
checking BIOS bank1...
passed.
C
FV command terminated.
Table 3-33 FV Screen References
Reference Description
A Displays the state of the current FW storage area.
B To perform a checksum test of the storage area, enter “y”.
C Displays the state of the checksum test.