System Operation 2-19
Using the DVD-ROM Drive
A DVD-ROM drive comes standard in the core PCIX Unit.
The DVD-ROM drive supports DVD-ROM and CD-ROM media.
See the following sections for information about using DVD-ROM or
CD-ROM discs in the DVD-ROM drive.
!
WARNING
Take care when inserting and removing DVD-ROM media.
To prevent injury, keep hands away from the tray when
ejecting or inserting the tray.
Inserting a Disc in the DVD-ROM Drive
Insert a DVD-ROM or CD-ROM disc in the DVD-ROM drive as follows (see
Figure 2-14).
1. Open the server door.
2. Press the Eject button on the DVD-ROM drive to eject the drive tray.
3. Place the disc on the tray, label facing up.
4. Press the Eject button on the DVD-ROM drive to insert the tray.
Removing a Disc from the DVD-ROM Drive
Remove a DVD-ROM or CD-ROM disc from the DVD-ROM drive as follows
(see Figure 2-14)
1. Open the server door.
2. Check that the drive access LED (orange) is off.
3. Press the Eject button on the DVD-ROM drive to eject the tray.
4. Remove the disc.
5. Press the Eject button on the DVD-ROM drive to insert the tray.
To Next Page
Loading...
