Service Processor 3-33
HC (Hardware Configuration)
NML MNT m b u
X X X
This command displays and changes the configuration information of the hardware.
The command displays and changes the partition settings.
See Table 3-38, “HC – ALL Display Screen” for an example of the HC display screen.
See the following tables for a list of hardware components and subcomponents and for a
list of subcommands and descriptions.
Table 3-34. HC Components and Subcomponents
Component Subcomponent (1) Subcomponent (2)
CELL Board Processor x4
MMC x2
TAG x8
CXI x2
--
ROW x8
CACHE x8
--
--
XIC Board CXI x4
1.6G x4
MOVER x2
SERIAL CONSOLE x4
--
--
--
--
PCIX Unit IOR
GXB x4 or GXB x2
1.6G x2
IOC x2
--
To Next Page
Loading...
