Service Processor 3-19
DF (Shut Down System Power <override>)
NML MNT m b u
X X X
This command turns off system power (DC).
The DF command turns off the system regardless of the operation state of the OS or
BIOS and without notifying either. (This corresponds to the power button override
function of a system that has a physical power button.)
Table 3-21. DF Screen
Screen Image Reference
iSPyz:---> df<ENTER>
CAUTION:
System power will be turned off without any notice to the softwares even if they are
running.
Enter partition number (0-3/all/CR=exit) : all<ENTER>
A
Execute OK? (y/[n]) y<ENTER>
B
DF command was accepted. System power of all partitions will be turned off soon. C
[iSPyz:INFO.ccc] partition 0 : power off sequence started.
[iSPyz:INFO.ccc] partition 1 : power off sequence started.
:
:
:
[iSPyz:INFO.ccc] partition 1 : power off sequence completed normally.
D
Table 3-22. DF Screen References
Reference Description
A Enter a partition number. If you select “all”, all the configured partitions become the
targets.
B
Displays the confirmation message. To continue, enter “y”.
C Displays the DF command acceptance message.
D Displays the state of the process running in the background.
To Next Page
Loading...
