NEC Express5800 1160Xd - PC (Power Cycle)

Service Processor 3-55
PC (Power Cycle)
NML MNT m b u
X X X
This command turns off the power (DC) of the system, and then turns it on again to
start up the system.
Note: This command turns off the system regardless of the
operation state of the OS or BIOS and without notifying either.
Table 3-43. PC Display Screen
Screen Image Reference
iSPyz:---> pcENTER>
CAUTION:
System power will be turned off without any notice to the softwares even if they are
running.
Enter partition number (0-37all/CR=exit) : all<ENTER>
A
Execute OK? (y/[n]) y<ENTER>
B
PC command was accepted. System power of all partitions will be turned off soon and
then will be turned on.
C
[iSPyz:INFO.ccc] partition 0 : power off sequence started.
[iSPyz:INFO.ccc] partition 1 : power off sequence started.
:
[iSPyz:INFO.ccc] partition 1 : power off sequence completed normally.
:
[iSPyz:INFO.ccc] partition 0 : power on sequence started.
[iSPyz:INFO.ccc] partition 1 : power on sequence started.
:
[iSPyz:INFO.ccc] partition 1 : power on sequence completed normally.
:
[iSPys:INFO.ccc] partition 1 : handed off the control to BIOS.
D
Table 3-44. PC Display Screen References
Reference Description
A Enter a partition number
If you select “all”, all the configured partitions become the targets.
However, the partitions that are already OFF do not become the targets
B Displays the confirmation message.
To execute, enter “y.”
C Displays the PC command acceptance message.
The actual process runs in the background.
D Displays the state of the process running tin the background.