NEC Express5800 1160Xd

To Next Page

To Previous Page

3-4 Service Processor

Table 3-2. Login Account and Password Defaults

Note: Only one connection to the OS Console per partition, up to five

connections to the Virtual SOP in the entire system, and only one prime connection to

the SP Command Console in the entire system can be made simultaneously. If LAN is

used, additional SP Command Consoles can be attached using hubs, but they will be

in monitor mode only, and commands can be entered only via the prime connection.

See Figure 3-2 for a diagram of using console modes.

iSP login Prompt

Main Menu

Serial Console

not Available

TCP-5001

not Connected

Press ESC Key

Connect TCP5001

Password Required

Select Exit

Vir tu al SOP

SP Command

Normal Mode

OS Console

Select OS

Press ^B Key

Select SOP

Press ^B Key

Select SP

Press ^B Key

Figure 3-2. Express5800/1000 Series Console Mode Operations

NEC Express5800 1160Xd - Page 60