3-22 Service Processor
Table 3-23. DL Screen (cont’d)
Screen Image Reference
***** LOG ANALYSIS RESULT *****
:
:
:
***** LOG ANALYSIS END *****
action? (h=help/CR=next) : q<ENTER>
J
Log area status (03/01/2002 18:59:00 iSPFW R01.01):
Type Entries Latest No. Earliest Latest
---------------------- ------------ ------------- ----------------------------- -------------------------------
activity 1000 404 01/31/2002 12:24:50 02/29/2004 13:54:12
HW fatal 16 0 01/31/2002 12:24:50 02/29/2004 13:54:12
HW recoverable 64 32 01/31/2002 12:24:50 02/29/2004 13:54:12
processor MCA 128 20 01/31/2002 12:24:50 02/29/2004 13:54:12
processor CMC 64 2 01/31/2002 12:24:40 02/29/2004 13:54:12
processor INIT 64 1 01/31/2002 12:24:40 01/31/2002 13:54:12
system dump 8 7 01/31/2002 12:24:40 02/29/2004 13:54:12
iSP snapshot 8 3 02/29/2004 15:34:51 02/29/2004 13:54:12
Display or FTP upload the activity logs? (d[isplay]/f[tp]/CR=exit) : <ENTER>
DL command terminated.
Table 3-24. DL Screen References
Reference Description
A On the DL command MENU, select “a”.
B, D Select whether to display all the activity logs or upload them to the FTP server.
(Uploading detailed logs individually is described later.)
C This is an example of uploading to the FTP server.
E If you choose to display, select a partition number first.
When you enter a partition number (0-7), only the events related to the partition can
be displayed. (In this case, events common to the partitions are included in the
display.)
If you select “all”, no filtering by partition number is done.
F Select a category.
You can display only the events of the specified category.
If you select “all”, no filtering by category is done.
G Select to display all the events at the same time or to prompt you every 25 lines.
H This is an example of activity logs.
To Next Page
Loading...
