4-45
3. Select ID-3/4/5 hard disks
Same as for Channel for ID-0/1/2, press Space in the status described in 3 to select Channel for ID-3/4/5 and
then press
Enter to determine the selection. ("ONLIN A02-01/02/03" is then displayed.)
4. Set logical drive
Pressing
F10 in the status described in 3 displays a screen shown below. Set each item. Then select "Advance
Menu" to display the "Advanced" sub menu screen.
The setting contents are shown below:
Setting item Default (initial value) Setting range
RAID 5 0, 5
Size Full capacity (logical drive) Full capacity
Stripe Size 64 KB 2/4/8/16/32/64/128
Write Policy WRBACK WRTHRU
WRBACK
Read Policy NORMAL NORMAL
READAHEAD
ADAPTIVE
Advanced
Cache Policy DirectIO DirectIO
CacheIO
Span YES CANSPAN (YES)
NOSPAN (NO)
To Next Page
Loading...
