8-20
Error
code
Error message Recommended Action
8120
Unsupported DIMM detected in DIMM
group #1.
8121
Unsupported DIMM detected in DIMM
group #2.
8122
Unsupported DIMM detected in DIMM
group #3.
8123
Unsupported DIMM detected in DIMM
group #4.
8124
Unsupported DIMM detected in DIMM
group #5.
8125
Unsupported DIMM detected in DIMM
group #6.
8126
Unsupported DIMM detected in DIMM
group #7.
8127
Unsupported DIMM detected in DIMM
group #8.
Contact your service representative to replace the two DIMMs in
the relevant group.
8130
Mismatch DIMM Type detected in DIMM
group #1.
8131
Mismatch DIMM Type detected in DIMM
group #2.
8132
Mismatch DIMM Type detected in DIMM
group #3.
8133
Mismatch DIMM Type detected in DIMM
group #4.
8134
Msmatch DIMM Type detected in DIMM
group #5.
8135
Mismatch DIMM Type detected in DIMM
group #6.
8136
Mismatch DIMM Type detected in DIMM
group #7.
8137
Mismatch DIMM Type detected in DIMM
group #8.
See the labels put on the DIMMs to make sure that the DIMMs of
the same type are installed in groups. If DIMMs of different types
are installed in one or more groups, contact the service
representative to replace DIMMs properly.
8140 DIMM group #1 with error is enabled.
8141 DIMM group #2 with error is enabled.
8142 DIMM group #3 with error is enabled.
8143 DIMM group #4 with error is enabled.
8144 DIMM group #5 with error is enabled.
8145 DIMM group #6 with error is enabled.
8146 DIMM group #7 with error is enabled.
8147 DIMM group #8 with error is enabled.
Contact your service representative to replace the two DIMMs in
the relevant group.
8150 NVRAM Cleared By Jumper.
8151 Password Cleared By Jumper.
Turn off the power. Then recover the jumper setting to the original
setting.
8160
Mismatch Processor Speed detected on
Processor 1.
Check the frequency of the processor. If it is unknown, contact
your service representative.
8161
Mismatch Processor Speed detected on
Processor 2.
8162
Mismatch Processor Speed detected on
Processor 3.
8163
Mismatch Processor Speed detected on
Processor 4.
8170
Processor 1 not operating at intended
frequency