NEC ITK-8LCX-1 TEL - Page 16

INTRODUCTION
7
NO.
NAME
FUNCTION
(11)
Feature key (with light)
To activate features such as terminal setup and to program One-
Touch Speed Calling keys.
(12)
Answer key (with light)
When LED on this key is lit, press this key to answer the incoming
call.
(13)
Recall key
To finish a call and hear the dial tone to make another call.
(14)
Programmable keys
(with light)
These keys can be programmed as Flexible line key/Programmable
feature key by system administrator.
(15)
Soft keys
To select the feature which is shown at the bottom of the LCD. The
appropriate feature key is displayed on the screen according to the
call handling process.
(16)
Home key
To go back to the Home window.
(17)
LCD
To display date or dialed number etc.
(18)
Call Indicator Lamp
The lamp at the top of display flashes when a call terminates to the
terminal. Also, when you use VOICE MAIL, the lamp lights when a
message has been left.
(19)
Touch Button Area
This area composed of 3 buttons; (2), (16), (20).
(20)
Multi key
To display application switch screen.