TERMINAL SETUP
32
Check whether IP
address/address (URI)
of FTP/TFTP/HTTPS
server is correct or not.
Set the proper IP
address/address
(URI) of
FTP/TFTP/HTTPS
server.
Check whether the
power to
FTP/TFTP/HTTPS
server and network
equipment is ON or
not.
Check whether the
LAN cable is
connected securely.
Reconnect the cable
securely.
If the retry of uploading fails many
times, the terminal may be in failure.
For details, please contact the system
administrator.
Other than above conditions, if
"Download Failed!" or "Upload Failed!"
is displayed, please contact the system
administrator.
TO RESTORE THE SETTING DATA OF
TERMINAL
1.
Display the Menu screen, and select “Settings”
2.
Select “
3
Data Backup/Restore”.
3.
Select “ 4
Protocol”
4.
Select a Protocol type of the server which stores
the Backup file.
5.
According to the selection in [Protocol] screen,
proceed to the following steps below.
When “ 1 FTP” is selected here, goto 6
When “ 2 TFTP” is selected here, goto
12
When “ 3 HTTPS” is selected here, goto
6
6.
Select “ 5
Account Settings”
7.
Select “ 1
User ID”
8.
Enter a User ID with digit keys.
Please refer to “HOW TO INPUT
CHARACTERS” for how to enter the
character.
9.
Select “ 2
Password”
10.
Enter a password with digit keys.
Please refer to “HOW TO INPUT
CHARACTERS” for how to enter the
character.
11.
Select “ 3
Folder”
12.
Enter the folder name where the backup file is
stored.
Please refer to “HOW TO INPUT
CHARACTERS” for how to enter the
character.
Enter the name of the folder where the
files are stored on the server (including
path from root directory to the folder that
stored backup file).
13.
Press Left key or Soft key (Back).
14.
Select “ 3
Server Address”
15.
Enter the IP address of FTP/TFTP/HTTPS server
with digit keys.
Use Asterisk key for separator of IP address.
To enter the address (URI) of
FTP/TFTP/HTTPS, press Soft key (IP/URI) to
switch the display to the URI input screen.
Press Soft Key (IP/URI).
By using the Dial keys, enter the address
(URI) of the server where the files are
stored.
Please refer to “HOW TO INPUT
CHARACTERS” for how to enter the
character.
To Next Page
Loading...
