TERMINAL SETUP
35
In case of temporarily disconnection
between terminal and Bluetooth
device by switch off or Bluetooth
mode off, Bluetooth
device reconnect
to the terminal when terminal switch on
or Bluetooth
mode on.
Example using Voyager5200:
You can reconnect by press talk
button. Whether the device connect,
please check pairing list.
TO CHECK THE PAIRING DEVICE AND
DISSCONNECT
1.
Display the Menu screen, and select “Settings”
2.
Select “ 6
Option Device”.
3.
Select “ 1
Bluetooth”
4.
Select “ 2
Pairing”
5.
Select “ 2
Pairing List”
6.
Check the connecting device.
“ ◎ ” indicates that Bluetooth
device is
connecting. If the device is not connected, “ ◎”
is not displayed.
7.
If you want to disconnect the device,
Press local softkey 3 (Option)
8.
Select “ 1
Disconnect”
You can switch to connect and
disconnect the device easily by tapping
the device name at procedure 5.
TO CHANGE INQUIRY TIME
1.
Display the Menu screen, and select “Settings”
2.
Select “ 6
Option Device”.
3.
Select “ 1
Bluetooth”
4.
Select “ 3
Additional setting”
5.
Select “ 1
Inquiry Time”
6.
Select desired inquiry time.
TO DISPLAY Bluetooth
MODULE
INFORMATION
1.
Display the Menu screen, and select “Settings”
2.
Select “ 6
Option Device”.
3.
Select “ 1
Bluetooth”
4.
Select “ 4
Bluetooth Information”
Displayed information as follows.
Device name
Device address
Firmware version
Core version
HFP(AG) version
To Next Page
Loading...
