TERMINAL SETUP
22
TO SET TIME FORMAT
Following explains how to set the time format for
display indicate.
1.
Display the Menu screen, and select “Settings”
2.
Select “
1
User Settings”.
3.
Select “ 3
Display”
4.
Select “ 1
Calendar format”.
5.
Select “ 2
Time format”.
6.
Select a 12 hour or 24 hour indicate.
If the “ 0 Automatic” is selected,
indication depends on the system data
setting. For details, please contact the
system administrator.
TO ENABLE/DISABLE VOLUME
LEVEL DISPLAY
Determines whether or not to display the
following volume levels: handset receiver volume,
speaker volume, ringer tone volume and LCD
contrast volume.
1.
Display the Menu screen, and select “Settings”
2.
Select “
1
User Settings”.
3.
Select “
3
Display”
4.
Select “ 2
Local Volume”.
5.
Select whether to display the volume level.
If it is set to “ 0 Automatic”, the “ 2
Enable” is applied.
TO SET SCREEN SAVER
To set whether starting the Screen Saver when
the terminal is idle for a certain period of time.
1.
Display the Menu screen, and select “Settings”
2.
Select “
1
User Settings”.
3.
Select “
3
Display”
4.
Select “ 3
Screen Saver”.
5.
Select “ 1
Screen Saver Mode”.
6.
Select whether to Enable/Disable the Screen
Saver.
7.
Select “ 2
Wait Time”.
8.
Enter the Wait Time.
To Next Page
Loading...
