TERMINAL SETUP
25
5.
Select “ 1
Turn Off Display”.
(When GUI mode is classic, menu number is 4.)
6.
Select “ 1
Turn Off Display Mode”.
7.
Select whether to launch Turn Off Display.
When “ 3 App priority” is selected, the
Screen Saver works by the external
application. The LCD will turn off when
the terminal receives the instruction to
turn off LCD from the external
application while Screen Saver is
running.
It is possible to set the Screen Saver
as the external application. For details,
please contact the system
administrator.
8.
Select “ 2
Wait Time”.
9.
Enter the Wait time.
The [Wait Time] is ineffective when
[Turn Off Mode] has been set as “ 3
App priority” and the terminal does not
receive the instruction to turn off the
display from the external application.
TO CHANGE GUI MODE
Following explains how to change the screen
image.
DT930 (Touch Panel model) is not
available to select classic mode.
1.
Display the Menu screen, and select “Settings”
2.
Select “
1
User Settings”.
3.
Select “ 3
Display”.
4.
Select “ 6
Advanced”.
(When GUI mode is classic, menu number is 7.)
5.
Select “ 3
GUI Mode”.
(Menu number depends on the terminal type.)
6.
Select desired mode.
Example display when GUI mode is classic.
TO CHANGE THEME
Following explains how to change theme color of
the screen.
When GUI mode is classic, this
function is not available.
1.
Display the Menu screen, and select “Settings”
2.
Select “
1
User Settings”.
3.
Select “ 3
Display”.
4.
Select “ 7
Portal Mode Settings”.
5.
Select “ 2
Change Theme”.
6.
Select desired theme.
Example display when theme is Black.
To Next Page
Loading...
