FEATURE OPERATION
57
TO MAKE AN INTERNAL CALL
When a dialed station number is registered in
Personal Directory, the corresponding name
information is displayed on the LCD while you are
hearing a ringback tone or are engaged in a
conversation. According to the initial settings, the
display may differ from the following examples. For
more information, contact the system administrator.
Here describes the Normal Dial Mode.
Regarding the other mode, see TO
ORIGINATE A CALL USING
SELECTIVE DIALING (DYNAMIC
DIAL PAD, PRESET DIAL)
1.
Lift a handset or press Speaker, and you will
receive a dial tone.
2.
Dial the desired station number. Display indicates
the dialed number.
(while hearing a ringback tone)
3.
Use the handset or Microphone to start a
conversation.
(while in a conversation)
My Line is an actual line that is directly
associated with station number of the
telephone. The user can make/answer
a call via this line. Usually, My line is
seized automatically only by lifting the
handset or pressing Speaker.
TO ANSWER AN EXTERNAL CALL
When a calling party telephone number is
registered in the Personal Directory, the
corresponding name information is displayed on the
LCD while you are hearing a ringing tone or are
engaged in a conversation. According to the initial
settings, the display may differ from the above
example. For more information, contact the system
administrator.
1.
You hear the ringing tone. A Call Indicator Lamp
flashes red.
(while hearing a ringing tone)
2.
Press Answer key.
3.
Lift the handset to answer the call.
(while in a conversation)
When an incoming call is terminated to
My Line of the telephone, the user can
usually answer the call only by lifting
the handset or pressing Speaker.
TO ANSWER AN INTERNAL CALL
The following procedure explains how to answer an
internal call routed to My Line of the telephone.
When calling station number is registered in
Personal Directory, the corresponding name
information will be displayed on LCD while you are
hearing a ringing tone or are engaged in a
conversation. According to the initial settings, the
display may differ from the above example. For
more information, contact the system administrator.
1.
You hear the ringing tone. Call Indicator Lamp
flashes red.
(while hearing a ringing tone)
2.
Press Answer.
3.
Lift the handset to answer the call.
(while in a conversation)
When an incoming call is terminated to
My Line of the telephone, the user can
usually answer the call only by lifting
the handset or pressing Speaker.
To Next Page
Loading...
