FEATURE OPERATION
65
DO NOT DISTURB
TO SET
1.
Press DND when the telephone is in idle state
(one hook).
With soft key operation, "DND" flashes
when set.
TO CANCEL
1.
Press flashing DND.
SECURITY MODE
This feature prevents unauthorized access and
information leakage from terminal. While the
telephone is locked, Security Lamp lights up.
Security mode is available for DT930
only.
Security key must be programmed in
advance. For the programming of
Security key, contact the system
administrator.
For using the feature of the terminal in
collaboration with a mobile phone, the
terminal cannot be placed in Security
mode pressing Security key. For
details, contact the system
administrator.
After a third attempt (if uncorrected
password is entered three times
consecutively), the telephone locks up,
and any key operation will be disabled
for 10 minutes.
While the telephone is locked, menu
key becomes disabled. Also, any
features provided by the Telephony
Server, such as call origination or call
answering, cannot be performed.
TO LOCK THE TELEPHONE
1.
Press Security button on the telephone. The
following message is displayed on LCD.
2.
Press Enter or the OK key to place telephone in
security mode.
3.
When the telephone is placed in security mode,
security lamp lights red and the screen saver will
be activated.
TO UNLOCK THE TELEPHONE
1.
Display the Password Entry screen by either of
the following operations.
Press any key while the screen saver is
activated.
Press security while the screen saver is
activated.
2.
Enter the password and press Enter or the OK key.
Security Lamp goes off and Security Mode is
canceled.
To Next Page
Loading...
