TERMINAL SETUP
19
WHEN DISTINCTIVE RINGING
PATTERNS TO DISTINGUISH INTERNAL
AND EXTERNAL INCOMING CALLS IS
NOT PROVIDED
You can set ringer tone from “Settings”. The
following explains how to set.
1.
Display the Menu screen, and select “Settings”
2.
Select “
1
User Settings”.
3.
Select “
1
Incoming Call”
4.
Select “
3
Ring Tone”.
5.
Select “ 2
Internal Call”.
Do not select “ 1 External Call”.
Ringing Tone which has been selected
in “ 2 Internal Call” will be applied to
both external and internal incoming
calls.
6.
Select desired tone type.
TO SET RINGING OF HEADSET
Following explains how to enable/disable the ringing
of headset.
This feature is required both terminal
and system setting at initial installation.
For details, please contact the system
administrator.
1.
Display the Menu screen, and select “Settings”
2.
Select “
1
User Settings”.
3.
Select “
1
Incoming Call”
4.
Select “
2
Headset Ring”.
5.
Select whether to ring the headset ringer.
To Next Page
Loading...
Need help?
General
