TERMINAL SETUP
28
TO SET USABILITY
Following explains how to set the Pop-up
operation of Home key.
This function is available when GUI
mode is classic.
1.
Display the Menu screen, and select “Settings”
2.
Select “
1
User Settings”.
3.
Select “ 7
Usability”
4.
Select “ 1
Help Key Mode”.
5.
Select a desired Help Key Mode.
TO RESET TERMINAL SETTINGS
Following explains how to clear the personal data of
the terminal.
1.
Display the Menu screen, and select “Settings”
2.
Select “
1
User Settings”.
3.
Select “ 0
Setting Reset”
4.
Enter the password.
5.
Select a desired mode of Home key.
When the password entry in failure, the
error message is displayed. In that case,
press Enter key or Soft key (OK)
and retry the password entry
When a password has been forgotten,
please contact the system
administrator.
TO DOWNLOAD A FILE
You can download files for Music on Hold, Ringer
Tone and Wallpaper. When downloading these
files, the terminal needs to be connected to the
network that has FTP, TFTP or HTTPS server.
For details on the FTP/TFTP/HTTPS
service, please contact the system
administrator.
1.
Display the Menu screen, and select “Settings”
2.
Select “
2
Download”.
3.
Select “ 3
Protocol”
4.
Select Protocol type of the server which stores the
download file.
5.
According to FTP, TFTP or HTTPS that you
selected in the [Protocol] screen, proceed to the
following steps.
When “ 1 FTP” is selected here, goto 6
When “ 2 TFTP” is selected here, goto
12
When “ 3 HTTPS” is selected here, goto
6
6.
Select “ 4
Account Settings”.
7.
Select “ 1 User ID”
8.
Enter a User ID with digit keys.
Please refer to “HOW TO INPUT
CHARACTERS” for how to enter the
character.
9.
Select “ 3
Folder”
10.
Enter the folder name where the download file is
stored.
Please refer to “HOW TO INPUT
CHARACTERS” for how to enter the
character.
11.
Press Left key or Soft key (Back).
To Next Page
Loading...
